• Version
• 192 Downloads
• 2.75 MB File Size
• 1 File Count
• March 5, 2017 Create Date
• March 5, 2017 Last Updated

Operation and Service Organizational, GS & Depot Maintenance Manual with Illustrated Parts Breakdown; Simulator Test Set AN/APM-245A

1-1. 
1-2. 
SCOPE 
This manual contains general operation, 
operaters and organizational maintenance, inter- 
mediate maintenance, and depot overhaul main- 
Test Set 
tenance Instructions 
AN,'APM-245A. (See fi ure I-I. Operating 
procedures are descri 
on IV. Organ- 
izational, intermediate, and d ot maintenance 
instructions are provided in 
and VII, respectively, and include instructions 
for troubleshooting, testing, and aligning the 
equipment. Also included in this manual are a 
description of the theory of operation 
a parts l' 
IX and uipment sche- 
matics and test data 
NOTE 
This technical manual and the equip- 
ment covered herein are configured 
for interserv•ice use and maintain- 
ability by direction of the Depart- 
ment of Defense AIMS System Pro- 
gram Office (DOD AIMS SPO). No 
changes shall be made to the equip- 
ment or the technical manual with- 
out the approval ofthe DOD AIMS spo 
1-3. MAINTENANCE FORMS AND RECORDS. 
1-4. REPORTS OF MAINTENANCE AND 
UNSATISFACTORY EQUIPMENT. Department 
of the Army forms and Procedures used for 
equipment maintenance will be those pre- 
scribed in TM 38-750. 
1-5. REPORT OF PACKAGING AND 
HANDLING DEFICIENCIES. Fill out and for- 
ward DD Form 6 (Report of Packaging and 
Handling Deficiencies) as prescribed in 
AR 700-58 (Army), NAVSUP Pub 378 (Navy), 
and 
AFR 71-4 (Air Force). 
1-6. 
REPORTING OF ERRORS. The report- 
of errors, omissions, and recommendations 
mg

for improving this publication by the individual 
use r is encouraged. Reports should be sub- 
milted on DA Form 2028 (Recommended Changes 
to DA Publications) and forwarded direct to 
Commanding General, U.S. Army Electronics 
Command, Attn: AMSEL-MA-S, 
Fort Monmouth, N. J. 07703. 
1-7. PURPOSE OF EQUIPMENT. 
Simulator Test Set AN,'APM-245A 
(hereafter referred to as the simulator test set) 
is a portable facility used for maintenance sup- 
port of transponder and interrogator units. The 
simulator test set provides the mode 4 signals 
necessary for bench testing and adjusting these 
units.