• Version
• 628 Downloads
• 908.98 KB File Size
• 1 File Count
• March 7, 2017 Create Date
• March 7, 2017 Last Updated

Cleaning and Corrosion Control - Vol. IV - Consumable Materials and Equipment for Aircraft and Avionics

1-1. GENERAL. Consumable materials and equipment 
listed in this volume shall be used for corrosion control. 
These materials and equipment have been approved 
only after extensive testing to prove their ability to 
perform properly and effectively without damaging any 
of the metallic or nonmetallic materials used in aircraft 
or avionics. Only those materials listed in this manual 
shall be used for cleaning or corrosion control. Materials 
listed in other manuals shall be used only when required 
procedures are not covered by this manual. When 
approved materials are not available, substitutions 
shall only be made by the appropriate Aircraft Controlli ng 
Custodians (ACC) or System Program Manager (SPM). 
1-2. PURPOSE. The purpose Of this manual is to 
provide ordering information for consumable materials 
and equipment used to prevent, control, and repair 
corrosion damage to aircraft and avionics.

1-3. SCOPE. The material in this manual contains 
basic corrosion prevention and corrective mai ntenance 
info rmation to be used at Organizational, Intermediate, 
and Depot levels. 
1-4. ARRANGEMENT OF MANUAL. 
14-1. A complete set of manuals to perform aircraft 
cleaning and corrosion control functions consists of 
Volumes l, Il, and IV. A complete set of manuals to 
perform avionics and electronics cleaning and corrosion 
control functions consists of Volumes l, Ill, and IV (Navy 
and Army). 
142. ArrangementofVolumelV. Volume IV consists 
of four chapters, arranged as shown in 
1-5. RELATED PUBLICATIONS. None.